ford Workshop Repair Guides

Ford Workshop Service and Repair Manuals

Body and Frame|Locks > < Driveline - Vibration Cross Member Cracks|Page 6371
Page 1
background image

Dashboard / Instrument Panel: Service and Repair

Fig. 12  Instrument Panel Attaching Locations. 1986-87 E-series.

Refer to Fig. 12 when performing this procedure.

1. Disconnect negative battery cable.
2. Remove Lefthand finish panel screws and pull rearward to disengage friction cups, then disconnect wiring connectors and remove panel.
3. Remove screws at top and bottom of instrument cluster finish panel, then pull rearward and disconnect speedometer and wiring connectors.
4.  Remove cluster.
5.  Remove radio and clock, if equipped.
6. Remove A/C grille from righthand end of instrument panel pad, if equipped.
7. Remove pad attaching nuts, then the pad.
8. Reverse procedure to install.

Body and Frame|Locks > < Driveline - Vibration Cross Member Cracks|Page 6371