E 350 Van V8-7.3L DSL Turbo VIN F (1995)
brake rear cable and conduit is inserted through the slot in the parking brake lever.
2. Pull the excess slack from the parking brake rear cable and conduit and insert the parking brake rear cable and conduit into the brake backing plate
access hole until the retainer prongs expand.
3. Insert the front end of the parking brake rear cable and conduit through the frame bracket until the prong expands.
4. Install the brake drum, wheel, and hub cap, and adjust the rear brake shoes.
5. Remove the drill bit from the parking brake control to tension the system.
6. Cycle the parking brake control three times to verify the parking brake control unit is functioning properly.
