E 350 Van V8-7.3L DSL Turbo VIN F (1995)
2.
Lift up slightly on the torque converter pilot and center the torque converter in the housing. Refer to Figure 2.
3.
Holding the torque converter by the pilot, rotate the torque converter using the Torque Converter Handles (T81P-7902-C). If the noise is no longer
present, the condition is normal and no further action is required.
4.
If the noise is still present, follow the diagnosis procedures as outlined in the Service Manual, Section 07-O1A, and service as required.
OTHER APPLICABLE ARTICLES: NONE
WARRANTY STATUS: INFORMATION ONLY
OASIS CODES: 504000
