E 450 V10-6.8L (2008)
Removal and Installation
1. Remove the 3 window latch screws.
2. Position aside the window latch.
3. Remove the upper door trim panel.
-
Pull outward on the upper door trim panel to release the 7 upper door trim panel retaining clips.
4. Remove the door pull handle.
-
Remove the 2 door pull handle screw covers.
-
Remove the 2 door pull handle screws.
5. CAUTION: Do not pull directly outward on the lower door trim panel, as damage will occur.
Remove the lower door trim panel.
-
Lift the lower door trim panel upward and then outward.
6. To install, reverse the removal procedure.