E 450 V10-6.8L (2008)
Vehicles with 6.0L diesel engine
7. Remove the junction box bracket bolts.
-
To install, tighten to 28 Nm (21 lb-ft).
8. Remove the junction box bracket bolt and position the junction box aside.
-
To install, tighten to 28 Nm (21 lb-ft).
9. Remove the engine cover.
10. NOTE: Charge air cooler (CAC) side shown, turbocharger side similar.
Loosen the CAC tube clamps.
-
To install, tighten to 12 Nm (9 lb-ft).
11. Remove the cowl ground strap bolt and disconnect the electrical connector pin-type retainer.
-
To install, tighten to 8 Nm (71 lb-in).