E 450 V10-6.8L (2008)
16. Remove the bolt and position the manifold absolute pressure (MAP) sensor aside.
17. Remove the 2 A/C condenser fitting nuts and disconnect the fittings.
-
Discard the O-ring seals.
-
To install, tighten to 8 Nm (71 lb-in).
All vehicles
18. Remove the washer reservoir filler tube.
1
Remove the 2 washer reservoir filler tube bolts.
2
Remove the washer reservoir filler tube.
-
To install, tighten to 9 Nm (80 lb-in).
19. Disconnect the evaporator outlet fitting.
-
Discard the O-ring seal.