E 450 V10-6.8L (2008)
All vehicles
NOTE: The hydraulic booster jumper line and the pressure line can be serviced separately. It is not necessary to disconnect the jumper line from the
hydraulic booster when servicing the pressure line.
9. NOTE: Thoroughly clean all foreign material from the threads.
Disconnect the pressure line-to-hydraulic booster jumper line fitting.
^
To install, tighten to 20 Nm (15 lb-ft).
10. NOTE: Thoroughly clean all foreign material from the threads.
Disconnect the pressure line-to-steering gear fitting and remove the pressure line.
^
To install, tighten to 20 Nm (15 lb-ft).
11. To install, reverse the removal procedure.
^
Fill the power steering system.
