E 450 V10-6.8L (2008)
8. Install the transmission insulator bolts and nuts.
^
Tighten to 94 Nm (69 lb-ft).
9. Install the driveshaft.
10. Start the engine. Move the transmission range selector lever through all the gear ranges, checking for engagements.
11. With the vehicle in NEUTRAL, engine running and the transmission at normal operating temperature 66-77° C (150-170° F), check and adjust the
transmission fluid level and check for any leaks. If transmission fluid is needed, add transmission fluid in increments of 0.24L (0.5 pt) until the
correct level is achieved (transmission fluid should be in the hot range cross-hatched area of the transmission fluid level indicator).
