ford Workshop Repair Guides

Ford Workshop Service and Repair Manuals

Initial Inspection and Diagnostic Overview|Page 5863 > < Initial Inspection and Diagnostic Overview|Page 5861
Page 18
background image

-

Is the voltage greater than 10 volts?

Yes

GO to X8.

No

GO to X2.

-------------------------------------------------
X2 CHECK FOR VOLTAGE AT THE TRAILER TOW CONNECTOR (BATTERY CHARGE INOPERATIVE)

 

-

Ignition OFF.

-

Disconnect: Trailer Tow C4099.

-

Ignition ON.

-

Measure the voltage between the trailer tow C4099-5, circuit CAT14 (OG), harness side and ground.

-

Is the voltage greater than 10 volts?

Yes

INSTALL a new trailer tow connector. TEST the system for normal operation.

No

GO to X3.

-------------------------------------------------
X3 CHECK THE TRAILER BATTERY CHARGE RELAY (INOPERATIVE)

 

-

Ignition OFF.

-

Disconnect: Trailer Battery Charge Relay.

-

Substitute a known good relay.

-

Ignition ON.

-

Measure the voltage between the trailer tow C4099-5, circuit CAT14 (OG), harness side and ground.

-

Is the voltage greater than 10 volts?

Yes

REMOVE the known good relay. INSTALL a new trailer battery charge relay. TEST the system for normal operation.

Initial Inspection and Diagnostic Overview|Page 5863 > < Initial Inspection and Diagnostic Overview|Page 5861