E 450 V8-5.4L (2009)
3. Remove the door pull handle.
1. Remove the door pull handle fastener trim covers.
2. Remove the 2 door pull handle screws.
3. Remove the door pull handle.
4. Remove the sliding door window garnish moulding.
-
Pry the window garnish moulding from the door, starting at the top.
5. Remove the sliding door trim panel.
1. Remove the 2 screws.
-
For the lower level trim, remove the 9 door trim panel rivets (not shown).
2. Lift the door trim panel slightly upward and remove.
6. To install, reverse the removal procedure.