E 450 V8-5.4L (2009)
Front Fender: Service and Repair
Fender - Front
Removal and Installation
1. Remove the radiator grille opening panel reinforcement. For additional information, refer to Radiator Grille Opening Panel Reinforcement - Upper
See: Grille/Service and Repair/Radiator Grille Opening Panel Reinforcement - Upper and Radiator Grille Opening Panel Reinforcement - Lower
See: Grille/Service and Repair/Radiator Grille Opening Panel Reinforcement - Lower.
2. Remove the front fender-to-front fender splash shield wheel lip screws.
3. With the front door open, remove the front fender rear upper screw.
-
To install, tighten to 10 Nm (89 lb-in).
4. Through the front fender wheel well, remove the inner screw.
-
To install, tighten to 10 Nm (89 lb-in).
