E 450 V8-5.4L (2009)
Arm Rest: Service and Repair
Seat Armrest - Rear, Bucket
Seat Armrest - Rear, Bucket
Removal and Installation
NOTE: For parts identification and locations, refer to Seat - Exploded View, Rear, Bucket See: Seats/Service and Repair/Rear Seats/Seat - Exploded
View, Rear, Bucket.
1. Release the hook-and-loop at the rear of the armrest cover and partially invert to access the armrest bolt.
2. Remove the armrest bolt and armrest.
-
To install, tighten to 35 Nm (26 lb-ft).
3. Remove the shim.
-
To install, position the shim to the armrest stop post.
4. To install, reverse the removal procedure.