E 450 V8-5.4L (2009)
1. For additional information, refer to the procedures.
Brake Caliper Anchor Plate
Brake Caliper Anchor Plate
Removal and Installation
1. Remove the brake pads. For additional information, refer to Brake Pads See: Disc Brake System/Brake Pad/Service and Repair/Rear Disc
Brake/Brake Pads.
2. Remove the 2 brake caliper guide pin bolts and the brake caliper anchor plate.
-
To install, tighten the guide pin bolts to 61Nm (45 lb-ft).
3. To install, reverse the removal procedure.
Brake Caliper Support Bracket
Brake Caliper Support Bracket
Removal and Installation
1. Remove the parking brake shoes.
2. Disconnect the parking brake cable and conduit.
3. Remove the 4 brake caliper support bracket bolts.
-
To install, tighten to 175 Nm (129 lb-ft).
4. To install, reverse the removal procedure.
