E 450 V8-5.4L (2009)
Parking Brake Cable: Removal and Replacement
Parking Brake Cable - LH
Parking Brake Cable - LH
Removal and Installation
1. Release the tension on the rear parking brake. For additional information, refer to Parking Brake Cable Tension Release See: Procedures.
2. Disconnect the RH parking brake cable from the equalizer.
3. Disconnect the LH parking brake cable from the intermediate parking brake cable at the cable union.
4. Compress the tabs and disconnect the parking brake cable conduit from the LH bracket assembly.
5. Release the rear parking brake cable from the parking brake actuating lever and remove the cable.
6. To install, reverse the removal procedure.
Parking Brake Cable - RH
Parking Brake Cable - RH
