E 450 V8-5.4L (2009)
Electronic Brake Control Module: Service and Repair
Anti-Lock Brake System (ABS) Module
Removal and Installation
All vehicles
1. Remove the 3 bolts and position the degas bottle aside.
-
To install, tighten the bolts to 10 Nm (89 lb-in).
Vehicles equipped with 6.0L engine or Hydro-Boost(R)
2. Remove the Air Cleaner (ACL).
All vehicles
3. Disconnect the ABS module electrical connector.
-
Release the lock tab.
-
Pull the connector from the module.