E 450 V8-5.4L (2009)
Fan Blade: Service and Repair
Cooling Fan - 4.6L, 5.4L and 6.8L
Removal
All vehicles
NOTE: The fan, fan clutch and shroud must be removed and installed together due to insufficient clearance to remove them separately.
1. With the vehicle in NEUTRAL, position it on a hoist.
2. Drain the engine cooling system. For additional information, refer to Cooling System Draining, Filling and Bleeding. See: Service and
Repair/Procedures
3. Remove the Air Cleaner (ACL) assembly.
4. Disconnect and position the radiator upper hose and the overflow hose from the radiator aside.
5. NOTICE: The coolant hose must be mounted in the lower hole and power steering hose in the upper hole or damage to the hoses may
occur.
Disconnect the coolant degas bottle and power steering hose from the shroud.