E 450 V8-5.4L (2009)
Installation
1. NOTE: Make sure the tab on the oil filter adapter nests into the notch in the oil cooler.
Position a new oil cooler on the oil filter adapter and install the threaded insert.
-
Tighten to 58 Nm (43 lb-ft).
2. Install a new oil filter.
-
Tighten to 16 Nm (142 lb-in).
3. Connect the 2 coolant hoses to the oil cooler.
4. Install the oil drain plug.
-
Tighten to 23 Nm (17 lb-ft).
5. Fill the engine with clean engine oil.
6. Fill and bleed the engine cooling system.