E 450 V8-5.4L (2009)
Removal
All engines
1. With the vehicle in NEUTRAL, position it on a hoist.
2. Drain the engine cooling system.
3. Remove the oil cooler. For additional information, refer to Oil Cooler See: Oil Cooler/Service and Repair.
4. Remove the LH engine support insulator. For additional information, refer to Engine Support Insulators See: Drive Belts, Mounts, Brackets and
Accessories/Engine Mount/Service and Repair/Removal and Replacement.
5. Drain the engine oil.
6. Disconnect the Engine Oil Pressure (EOP) switch electrical connector.
7. Remove the EOP switch.
8. Release the lower radiator hose clamp and position the lower radiator hose aside.
4.6L (2V) engines
9. Remove the 2 nuts, 3 bolts, oil filter adapter and gasket.
-
Discard the gasket.
5.4L (2V) engines