E 450 V8-5.4L (2009)
2. Remove the 3 pin-type retainers.
3. Lift the panel slightly and remove the trim panel from the body side.
8. Remove the window latches (if equipped).
1. Remove the 2 window latch screws (1 shown).
2. Remove the window latch.
All vehicles
9. Disconnect the blower motor resistor electrical connector.
10. Remove the blower motor resistor.
1. Remove the 2 blower motor resistor screws.
2. Remove the blower motor resistor.
11. To install, reverse the removal procedure.
