ford Workshop Repair Guides

Ford Workshop Service and Repair Manuals

Heater Core|Page 5341 > < Heater Core|Page 5339
Page 2
background image

Remove the lower quarter trim panel.

1. Remove the 5 screws (extended wagon), or 3 screws (regular wagon).

2. Remove the 3 pin-type retainers.

3. Lift the panel slightly and remove the trim panel from the body side.

All vehicles

9. Remove the window latches (if equipped).

1. Remove the 2 window latch screws (1 shown).

2. Remove the window latch.

10. Remove the heater core cover.

1. Remove the 6 screws.

2. Remove the heater core cover.

11. Release the clamps and disconnect the heater hoses from the heater core.

12. NOTE: Use care to prevent any residual coolant from spilling into the passenger compartment when removing the heater core.

Remove the heater core.

1. Remove the heater core case seal.

2. Remove the heater core.

Heater Core|Page 5341 > < Heater Core|Page 5339