ford Workshop Repair Guides

Ford Workshop Service and Repair Manuals

Initial Inspection and Diagnostic Overview|Page 6950 > < Initial Inspection and Diagnostic Overview|Page 6948
Page 7
background image

GO to O8.

No

REPAIR circuit CLS34 (GY) for a short to ground. CLEAR the DTCs. REPEAT the self-test.

-------------------------------------------------
O4 CHECK THE REAR PARKING LAMPS VOLTAGE SUPPLY CIRCUIT FOR A SHORT TO VOLTAGE

 

-

Ignition OFF.

-

Disconnect: SJB C2280d.

-

Ignition ON.

-

Do the rear parking lamps continue to illuminate?

Yes

For wagon, REPAIR circuit CLS30 (VT/WH) for a short to voltage. TEST the system for normal operation.

For cutaway and stripped chassis vehicles, GO to O5.

No

GO to O6.

-------------------------------------------------
O5 ISOLATE THE SHORT TO VOLTAGE IN THE REAR PARKING LAMPS VOLTAGE SUPPLY CIRCUIT

 

-

Ignition OFF.

-

Disconnect: Body Builder C432.

-

Ignition ON.

-

Do the rear parking lamps continue to illuminate?

Yes

The vehicle is operating correctly. REFER to the body builder information to continue diagnosis.

No

REPAIR circuit CLS30 (VT/WH) for a short to voltage. TEST the system for normal operation.

-------------------------------------------------
O6 CHECK THE FRONT PARKING LAMPS VOLTAGE SUPPLY CIRCUIT FOR A SHORT TO VOLTAGE

 

-

Ignition OFF.

-

Disconnect: SJB C2280e.

-

Ignition ON.

-

Do the front parking lamps continue to illuminate?

Yes

For wagon, REPAIR circuit CLS30 (VT/WH) for a short to voltage. TEST the system for normal operation.

For cutaway and stripped chassis vehicles, GO to O7.

No

GO to O8.

-------------------------------------------------

Initial Inspection and Diagnostic Overview|Page 6950 > < Initial Inspection and Diagnostic Overview|Page 6948