E 450 V8-5.4L (2009)
-------------------------------------------------
T9 CHECK FOR VOLTAGE TO THE TRAILER TOW CONNECTOR (7-PIN) (RH TURN)
-
Disconnect: Trailer Tow C4099.
-
While applying the brake pedal, measure the voltage between the trailer tow C4099-4, circuit CAT09 (GN), harness side and ground.
-
Is the voltage greater than 10 volts?
Yes
INSTALL a new trailer tow connector. TEST the system for normal operation.
No
GO to T10.
-------------------------------------------------
T10 CHECK THE RH TRAILER TOW TURN RELAY
-
Disconnect: RH Trailer Tow Stop/Turn Relay.
-
Substitute a known good relay.
-
For vehicles equipped with a class I trailer tow package, while applying the brake pedal, measure the voltage between the trailer tow C4098-1,
circuit CAT09 (GN), harness side and ground.
-
For vehicles equipped with a class II trailer tow package, while applying the brake pedal, measure the voltage between the trailer tow C4099-4,
circuit CAT09 (GN), harness side and ground.
-
Is the voltage greater than 10 volts?
Yes
REMOVE the known good relay. INSTALL a new RH trailer tow stop/turn relay. TEST the system for normal operation.
No
REMOVE the known good relay. GO to T11.
-------------------------------------------------
T11 CHECK THE STOPLAMP INPUT CIRCUIT TO THE RH TRAILER TOW STOP/TURN RELAY FOR AN OPEN
-
While applying the brake pedal, measure the voltage between the trailer tow RH stop/turn relay pin 1, circuit CLS19 (VT/OG), BJB face side and