E 450 V8-5.4L (2009)
7. NOTE: Make sure the wheels are in the straight-ahead position.
Remove the driver air bag module.
1. Remove the 2 driver air bag module bolt covers (1 shown).
2. Remove the 2 driver air bag module bolts (1 shown).
3. Disconnect the horn electrical connector.
4. Disconnect the clockspring electrical connector.
5. Remove the driver air bag module.
8. Remove the glove compartment.
9. Disconnect the passenger air bag module electrical connector.
10. Install RCM fuse 32 (10A) to the SJB.
11. Connect the battery ground cable.
