E 450 V8-5.4L (2009)
Power Steering Line/Hose: Service and Repair
Steering Gear to Fluid Cooler Return Hose
Steering Gear to Fluid Cooler Return Hose
Removal and Installation
NOTICE: While repairing the power steering system, care should be taken to prevent the entry of foreign material or failure of the power
steering components may result.
1. Using a suitable suction device, remove the power steering fluid from the fluid reservoir.
2. Compress the clamp and disconnect the return hose from the cooler.
3. Disconnect the return hose fitting from the steering gear.
-
To install, tighten to 20 Nm (177 lb-in).
4. To install, reverse the removal procedure.
5. Fill the power steering system.