E 450 V8-5.4L (2009)
Intake Air Duct: Service and Repair
Air Cleaner Outlet Pipe
Air Cleaner Outlet Pipe - 4.6L, 5.4L, 6.8L
Removal and Installation
1. Remove the Air Cleaner (ACL). For additional information, refer to Air Cleaner - 4.6L, 5.4L and 6.8L See: Air Cleaner Housing/Service and
Repair/Air Cleaner.
2. Loosen the clamp at the Throttle Body (TB).
-
To install, tighten to 4 Nm (35 lb-in).
3. Disconnect the vapor tube quick connect fitting from the ACL outlet pipe and remove the ACL outlet pipe.
4. To install, reverse the removal procedure.