E 450 V8-5.4L (2009)
2. Remove the manual control lever.
5. Remove the TR sensor bolts and TR sensor.
Installation
1. Loosely install the TR sensor bolts and TR sensor.
2. NOTE: The manual control lever must be in the NEUTRAL position.
Using the TR Sensor Alignment Gauge, align the TR sensor slots. The TR Sensor Alignment Gauge is designed to fit snug.
3. NOTICE: Tightening one screw before tightening the other may cause the Transmission Range (TR) sensor to bind or become damaged.
Tighten the TR sensor bolts.
-
Tighten to 9 Nm (80 lb-in).
4. Install the manual control lever.
1. Position the manual control lever.
