E 450 V8-5.4L (2009)
-
Align the passenger air bag module J-nuts correctly before installing the passenger air bag module bolts.
5. Partially remove the passenger air bag module.
6. Disconnect the electrical connector, release the wiring harness pin-type retainer and remove the passenger air bag module.
7. To install, reverse the removal procedure.
8. Repower the SRS. For additional information, refer to Supplemental Restraint System (SRS) Depowering and Repowering See: Air Bag(s)
Arming and Disarming/Service and Repair in the General Procedures portion.