E 450 V8-5.4L (2009)
Seat Heater Switch: Service and Repair
Seat Control Switch
Seat Control Switch
Removal and Installation
NOTE: For parts identification and locations, refer to Seat - Exploded View, Front See: Body and Frame/Seats/Service and Repair/Front Seats/Seat -
Exploded View, Front.
1. Disconnect the seat control switch electrical connector from under the front of the cushion frame.
-
Note wire harness routing for correct installation.
2. Remove the 3 screws and outboard side shield.
3. Remove the 2 screws and seat control switch.
4. To install, reverse the removal procedure.