E 450 V8-5.4L (2009)
Engine Temperature Sensor: Service and Repair
Cylinder Head Temperature (CHT) Sensor
NOTE: 5.4L shown, 4.6L and 6.8L similar.
Removal and Installation
1. Remove the generator.
2. Disconnect the Cylinder Head Temperature (CHT) sensor electrical connector.
3. Remove the CHT sensor.
-
Coat the CHT sensor threads with high temperature nickel anti-seize lubricant prior to installation.
-
To install, tighten to 26 Nm (19 lb-ft).
4. To install, reverse the removal procedure.
