Transmission Speed Sensor Replacement for E 450 V8-54L (2009) - 4R70E/4R75E
2. Install the bolt.
-
Tighten to 9 Nm (80 lb-in).
2. Connect the TSS and intermediate shaft speed sensor connector.
3. Raise the transmission and crossmember in position.
4. Install the LH crossmember bracket.
5. Install the 2 LH crossmember bracket nuts.
-
Tighten to 81 Nm (60 lb-ft).
6. Install the RH crossmember bracket.
7. Install the 2 RH crossmember bracket nuts.
-
Tighten to 81 Nm (60 lb-ft).