E 450 V8-5.4L (2009)
NOTE: The hydraulic booster jumper line and the pressure line can be serviced separately. It is not necessary to disconnect the jumper line from the
hydraulic booster when servicing the pressure line.
9. NOTE: Thoroughly clean all foreign material from the threads.
Disconnect the pressure line-to-hydraulic booster jumper line fitting.
-
To install, tighten to 63 Nm (46 lb-ft).
10. NOTE: Thoroughly clean all foreign material from the threads.
Disconnect the pressure line-to-steering gear fitting and remove the pressure line.
-
To install, tighten to 20 Nm (177 lb-in).
11. To install, reverse the removal procedure.
12. Fill the power steering system.