E 450 V8-5.4L (2009)
Transmission Speed Sensor: Service and Repair
4R70E/4R75E
Output Shaft Speed (OSS) Sensor
Output Shaft Speed (OSS) Sensor
Removal and Installation
1. With the vehicle in NEUTRAL, position it on a hoist.
2. Disconnect the Output Shaft Speed (OSS) sensor electrical connector.
3. Remove the OSS sensor bolt and sensor.
-
Remove the OSS sensor bolt.
-
Remove the OSS sensor.
4. To install, reverse the removal procedure.
-
Tighten bolt to 12 Nm (106 lb-in).
Turbine Shaft Speed (TSS) Sensor
Turbine Shaft Speed (TSS) Sensor