E 450 V8-5.4L (2009)
Shift Cable: Service and Repair
Selector Lever Cable and Bracket - 4R70E, 4R75E
Selector Lever Cable and Bracket - 4R70E, 4R75E
Removal and Installation
NOTICE: To prevent selector lever cable damage, do not apply force to the selector lever cable assembly between the steering column shift tube
bracket and the steering column bracket.
1. Remove the 2 screws and Data Link Connector (DLC).
2. Pull to release the retaining clips and remove the steering column opening lower finish panel.
3. Remove the 4 steering column-to-cross car beam nuts and lower the steering column.
-
To install, tighten to 15 Nm (133 lb-in).