E 450 V8-5.4L (2009)
Installation
1. Install the transmission insulator and retainer and install the bolts.
-
Tighten to 90 Nm (66 lb-ft).
2. Lower the transmission while aligning the retainer studs with the holes in the crossmember. Allow the full weight of the transmission to rest on the
crossmember.
3. Remove the high-lift transmission jack.
4. Install the transmission insulator and retainer to crossmember nuts.
-
Tighten to 90 Nm (66 lb-ft).
5. Remove the supports and lower the vehicle.