E 450 V8-5.4L (2009)
Transmission Temperature Sensor/Switch: Service and Repair
Torqshift
Transmission Fluid Temperature (TFT) Sensor
Removal
1. Remove the transmission fluid pan gasket and filter. For additional information, refer to Fluid Pan, Gasket and Filter See: Fluid Filter -
A/T/Service and Repair/TorqShift.
2. Disconnect the Transmission Fluid Temperature (TFT) sensor connector.
3. Press the tab, rotate the sensor counterclockwise and pull out.
4. Inspect the O-ring. If the O-ring is damaged install a new TFT sensor.
Installation
1. Lightly lubricate the O-ring with automatic transmission fluid and install a new TFT sensor. Make sure to slightly rotate the sensor to lock it in
place.
2. Connect the TFT sensor connector.
3. Install the transmission fluid filter, pan gasket and pan. For additional information, refer to Fluid Pan, Gasket and Filter See: Fluid Filter -