E 450 V8-5.4L (2009)
5. NOTE: The driveshaft flange yoke fits tightly on the pinion flange pilot. To make sure that the yoke seats squarely on the flange, tighten the bolts
evenly in a cross pattern in the sequence shown.
Position the driveshaft flange yoke on the pinion flange with the index marks aligned and install the 4 new driveshaft-to-pinion flange bolts.
-
Tighten the new bolts to 112 Nm (83 lb-ft).
Driveshaft - Rear Two-Piece
Driveshaft - Rear Two-Piece
Removal