E 450 V8-6.0L DSL Turbo (2007)
Ignition Switch Lock Cylinder: Service and Repair
Ignition Lock Cylinder - Functional
IGNITION LOCK CYLINDER - FUNCTIONAL
Removal and Installation
NOTE: When a new lock cylinder is installed, the door lock cylinder and ignition lock cylinder should be installed as a set. This eliminates carrying an
extra key which will fit only one lock. If a new key is used, the new key code number is stamped on a metal tag attached to the key.
1. Disconnect the battery.
2. Remove the 3 screws and the lower steering column shroud.
3. Remove the ignition lock cylinder.
1
Turn the key to the ON position.
2
Using a suitable tool, press the ignition lock cylinder release pin while pulling out the ignition lock cylinder.