E 450 V8-6.0L DSL Turbo VIN P (2004)
Crankshaft Main Bearing: Specifications
Crankshaft
Main bearing journal diameter-Standard size .................................................................................................. 80.9873-81.0127 mm (3.188-3.150 inch)
Main bearing journal diameter-0.254 mm (0.010 inch) undersize .................................................................... 80.7333-80.7587 mm (3.178-3.140 inch)
Main bearing journal diameter-0.508 mm (0.020 inch) undersize .................................................................... 80.4793-80.5047 mm (3.168-3.130 inch)
Main bearing journal diameter-0.762 mm (0.030 inch) undersize .................................................................... 80.2253-80.2507 mm (3.158-3.120 inch)
Lower crankcase main bearing cap bolts
CAUTION: To prevent engine damage, make sure that the longer main cap bolts (M14 x 2 x 127) are installed inboard and the shorter bolts (M14 x 2
x 114) are installed outboard.
Install all 20 lower crankcase main bearing mounting bolts.
Tighten the mounting bolts in this sequence.
Tighten bolts to ...................................................................................................................................... 149 Nm (110 ft. lbs.) in numerical sequence.
Tighten bolts again to ............................................................................................................................ 176 Nm (130 ft. lbs.) in numerical sequence.
Tighten bolts to ...................................................................................................................................... 231 Nm (170 ft. lbs.) in numerical sequence.