E 450 V8-6.0L DSL Turbo VIN P (2004)
![background image](/ford/e_450/v8-6.0l_dsl_turbo_vin_p/Page-789001.png)
Engine Block Heater: Service and Repair
Block Heater-6.0L Diesel
Removal and Installation
1. With the vehicle in NEUTRAL, position it on a hoist.
2. Drain the cooling system.
3. Remove the engine cover.
4. Disconnect the block heater electrical connector.
5. Remove the block heater.
^
Remove and discard the O-ring seal.
6. To install, reverse the removal procedure.
^
Install a new O-ring seal.