E 450 V8-6.0L DSL Turbo VIN P (2004)
1. NOTE: Start installing the bolts with the second bolt from the rear on the top. The hole diameter is smaller, therefore allowing alignment of the
remaining bolts.
NOTE: Apply anti-seize lubricant to the bolt threads prior to installing the bolts.
Install the LH exhaust manifold and bolts. Tighten the bolts in the sequence shown.
2. Connect the exhaust back pressure tube at the exhaust manifold.
3. Install the LH bolts for the turbocharger adapter pipe.
4. Install the engine cover.
