E 450 V8-6.0L DSL Turbo VIN P (2004)
Engine Control Module: Service and Repair
Powertrain Control Module (PCM)
POWERTRAIN CONTROL MODULE (PCM)
REMOVAL
1. CAUTION: Make sure the ignition switch is in the OFF position prior to working on the electronic engine controls.
Turn the ignition switch to the OFF position.
2. Remove the retainers and the air deflector.
3. Remove the power steering reservoir bracket retainers.
4. Remove the power steering fluid indicator and retainers. Remove the power steering reservoir bracket. Install the power steering indicator and
position aside.