E 450 V8-6.0L DSL Turbo VIN P (2004)
9. Remove the secondary battery case cover.
-
Remove the 2 attaching bolts.
10. Disconnect the battery cables from the primary and secondary batteries.
11. Remove the 3 harness locators, along the RH frame rail, and pull the harness through the front body mounting point.
12. Remove the 2 harness locators in front of the front body mounting point.
13. Remove the starter solenoid wiring.
1
Remove the protective cap.
2
Remove the solenoid enable terminal nut.
3
Remove the solenoid enable cable end.
4
Remove the solenoid B+ terminal nut.
5
Remove the solenoid B+ cable end.
6
Remove the starter cable hanger stud nut.
7
Remove the starter cable hanger.
14. Lower the vehicle.