E 450 V8-6.0L DSL Turbo VIN P (2004)
8. Install the correct reverse servo assembly.
1. Install the reverse band servo spring.
2. Install the reverse band servo piston and rod.
3. Install the reverse band servo cover.
9. Using the special tool, install the reverse servo retaining ring.
1. Compress the servo spring.
2. Install the reverse band servo retaining ring.
10. Install the main control valve body.
Overdrive Servo
Overdrive Servo
Special Tool(s)
Removal
1. Remove the main control valve body.
2. NOTE: If the tool is not available, extreme care must be taken. Spring pressure will force overdrive servo piston assembly out of case. Case bore
damage may result from trying to pry on overdrive servo internal retaining ring.