E 450 V8-6.0L DSL Turbo VIN P (2004)
14. Inspect the output shaft and park gear for damage.
1. Inspect the park gear for damage.
2. Inspect the output shaft speed (OSS) gear for damage.
15. If damage to either the OSS or park gears is found, remove the park gear and output shaft as an assembly.
16. NOTE: The park gear and OSS gear may be present on the output shaft.
Remove the park and OSS gear from the output shaft.
17. Inspect the Teflon seals in the rear of the case. If the seals are worn or damaged, install new scarf cut seals.
Installation
All vehicles