E 450 V8-6.0L DSL Turbo VIN P (2004)
Shift Cable: Service and Repair
Shift Lever Cable and Bracket- TorqShift
Shift Lever Cable and Bracket- TorqShift
Removal and Installation
All vehicles
1. NOTE: To prevent cable damage, do not apply force to the transmission shift cable assembly between the steering column shift tube bracket and
the steering column bracket.
Disconnect the transmission shift cable from the steering column.
1. Disconnect the transmission shift cable from the steering column shift tube lever.
2. Carefully lift the locking tab and disconnect the transmission shift cable from the steering column bracket.
2. Disconnect the cable push pin from the stud in the bulkhead.
3. Push the rubber grommet and transmission shift cable through the bulkhead.
4. Raise and support the vehicle.
4R100 transmission
5. NOTE: To prevent shift cable assembly damage, do not apply force to the transmission shift cable between the manual control lever and the
transmission shift cable bracket.
Remove the transmission shift cable from the transmission.
1. Disconnect the transmission shift cable from the manual control lever.
2. Depress the lock tabs to release the transmission shift cable and disconnect the transmission shift cable from the transmission shift cable
bracket.
6. Remove the shift cable bracket from the transmission.
