E 450 V8-6.0L DSL Turbo VIN P (2004)
Transmission Position Switch/Sensor: Service and Repair
TorqShift Automatic Transmission
Digital Transmission Range (TR) Sensor
Special Tool(s)
Removal
1. With the vehicle in NEUTRAL, position it on a hoist.
2. Disconnect the shift cable end and position it out of the way.
3. Remove the transmission fluid pan, gasket and filter.
4. Disconnect the transmission range sensor electrical connector.
5. NOTE: The pin should be driven up through the manual valve.
Remove and discard the manual valve detent lever shaft retaining pin and discard.