Econoline E150 1/2 Ton V8-4.6L SOHC VIN 6 (1999)
9. Disconnect the underbody tube spring lock coupling.
10. Lower the vehicle.
11. Remove the condenser to evaporator tubes.
INSTALLATION
1. Service the replacement condenser to evaporator tube with the proper amount of PAG compressor oil, Motorcraft YN-12c, F7AZ-19589-DA, or
equivalent meeting Ford specification WSH-M1C231-B.
2. Route the condenser to evaporator tube.
3. Raise the vehicle.
4. Connect the underbody tube spring lock coupling.
5. Lower the vehicle.
6. Connect the A/C evaporator core fitting.
1
Lubricate the new O-rings with PAG compressor oil, Motorcraft YN-12c, F7AZ-19589-DA, or equivalent meeting Ford specification
WSH-M1C231-B and install the O-rings.
2
Connect the A/C evaporator core fitting.
3
Install the screw.
CAUTION: Use a wrench on each side of the fitting to prevent damage to the A/C fitting.
