ford Workshop Repair Guides

Ford Workshop Service and Repair Manuals

Hydraulic Control Assembly - Antilock Brakes|Specifications|Page 5731 > < Hydraulic Control Assembly - Antilock Brakes|Specifications|Page 5729
Page 1
background image

Hydraulic Control Assembly - Antilock Brakes: Service and Repair

Hydraulic Control Unit - (HCU)

Removal 

WARNING:  Brake fluid contains polyglycol ethers and polyglycols. Avoid contact with eyes. Wash hands thoroughly after handling. If
brake fluid contacts eyes, flush eyes with running water for 15 minutes. Get medical attention if irritation persists. If taken internally, drink
water and induce vomiting. Get medical attention immediately.
 

CAUTION:  Brake fluid is harmful to painted and plastic surfaces. If brake fluid is spilled onto a painted or plastic surface, immediately wash it with
water.

1. Disconnect the battery ground cable.

2. Position the radiator coolant recovery reservoir aside.

1

Remove the bolts.

2

Position the radiator coolant recovery reservoir aside.

3

NOTE:  Do not disconnect the hose from the power steering pump reservoir.

Remove the bolts and position the power steering pump reservoir aside.

4. Disconnect the brake lines from the brake master cylinder.

Hydraulic Control Assembly - Antilock Brakes|Specifications|Page 5731 > < Hydraulic Control Assembly - Antilock Brakes|Specifications|Page 5729