ford Workshop Repair Guides

Ford Workshop Service and Repair Manuals

Brake Master Cylinder|Removal and Installation|Page 5880 > < Brake Master Cylinder|Removal and Installation|Page 5878
Page 1
background image

Brake Master Cylinder: Service and Repair
Brake Fluid Reservoir

Reservoir

Removal 

WARNING:  Brake fluid contains polyglycol ethers and polyglycols. Avoid contact with eyes. Wash hands thorough after handling. If brake
fluid contacts eyes, flush eyes with running water for 15 minutes. Get medical attention if irritation persists. If taken internally, drink water
and induce vomiting. Get medical attention immediately.
 

1. Use a suitable suction device to drain the brake master cylinder reservoir.

2. Remove the brake master cylinder reservoir.

^

For Tokico, carefully pry up on the brake master cylinder reservoir to remove.

^

For Bosch, remove the roll pins, then carefully pry up on the brake master cylinder reservoir to remove.

3. Disconnect the brake master cylinder fluid level warning switch.

Installation 

Brake Master Cylinder|Removal and Installation|Page 5880 > < Brake Master Cylinder|Removal and Installation|Page 5878