Econoline E150 1/2 Ton V8-4.6L SOHC VIN W (2001)
3.
Drill holes at the end of the crack to prevent crack expansion.
4.
V-grind the crack to ensure proper weld penetration.
5.
Use clamps/jacks as necessary to align both sides of the crack.
NOTE
BE SURE THAT TEMPERATURE OF THE METAL DOES NOT EXCEED 760°C (1400°F) DURING WELDING.
6.
Weld both sides of the affected areas where possible.
7.
Weld around the edge of the right rear attaching tab for the spring tower to the # 1 crossmember of the frame (Figure 1, View A). DO NOT weld
the rivet.
8.
Clean off weld flash/scale and paint welded sections of the frame.
OTHER APPLICABLE ARTICLES: NONE
SUPERSEDES: 99-14-11
WARRANTY STATUS: Eligible Under The Provisions Of Bumper To Bumper Warranty Coverage.
OPERATION/DESCRIPTION/TIME
DEALER CODING
OASIS CODES: 305000, 390000, 702000, 702100